Hosted and supported by


Keynote Speaker I 演講嘉賓


Keynote Speaker I

Prof. Shen-Ming Chen
National Taipei University of Technology, Taiwan

Prof. Shen-Ming Chen (h-index > 60) received his PhD degrees in chemistry from National Taiwan University, Taipei, Taiwan. He was a visiting postdoctoral fellow with the Institute of Inorganic Chemistry, Friedrich-Alexander University Erlangen-Nuremberg, Germany in 1997. He joined Department of Chemical Engineering, National Taipei Institute of Technology, Taipei, Taiwan in 1985. He had been an associate professor of Department of Chemical Engineering, National Taipei Institute of Technology, Taipei, Taiwan from 1991 to 1997. Since August 1997, he has been a full professor of Department of Chemical Engineering and Biotechnology, National Taipei University of Technology. He has been the Dean (Curator) of library, National Taipei University of Technology, Taiwan from 2000 to 2006 and the Director of Extracurricular Activity, office of student affairs, National Taipei University of Technology, Taiwan from 1995 to 2000.
Prof. Shen-Ming Chen has published over 500 research and review papers in internationalSCI journals. Some of their papers have been selected as the most cited papers in theJournal of Electroanalytical Chemistry and Biosensor & Bioelectronics. He received threetimes Distinguish Professor awards. He also received three times Outstanding Research Award from National Taipei University of Technology, Taiwan. He have edited or attended two books for NOVA publications titled “Nanostructured Materials for Electrochemical Biosensors” and “Biosensors: Properties, Materials and Applications” and contributed four book chapters.
His research interest includes nanocomposites, bionanomaterials, bionanotechnology, electrochemical biosensor, biosensors, bioelectrochemistry,, chemical materials, electroanalytical Chemistry, electrocatalysis and electroanalysis, photoelectrochemistry, metalloproteins, metalloporphyrins, nanotechnology, spectroscopic techniques, scanning probe techniques, quartz crystal microbalance, materials research, fuel cells, solar cell and photovoltaic cells.

Keynote Speaker II

Prof. Edward Yi Chang

National Chiao Tung University, Taiwan

Vice President, Dean of Research and Development & Chair Professor

Educational Background
University of Minnesota, Twin Cities USA Department of Materials Science and Engineering Ph.D
Department of Material Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan(1973-1977)​

Dean of International College of Semiconductor Technology (2014-present)
Head of NCTU-TSMC Research center, National Chiao Tung University, Taiwan (2013-present)
Dean of Research and Development, National Chiao Tung University, Taiwan (2011-present)
Associate Dean of Engineering School NCTU (2009-2011)
Professor, Jointly Appointed, Departments of Material Science and Engineering / Electronics Engineering, National Chiao Tung University, Taiwan (2008-present)
Chairman, Department of Material Science and Engineering, National Chiao Tung University, Taiwan (2003-2007)
CEO, International Office, National Chiao Tung University, Taiwan(2002-2004)
Professor, Department of Material Science and Engineering, National Chiao Tung University, Taiwan (1999- Present)
General Manager, Hexawave Inc, Taiwan (1997-1999)
Member of technical staff, COMSAT Laboratory, USA(1988-1990)
Member of technical staff, Unisys Corporation, USA(1985-1988)

Keynote Speaker III


Prof. Norbert Schwesinger
Technical University of Munich, Germany


Norbert Schwesinger studied Electrical Engineering from 1973-1977 and got his Dr.-Ing. in 1983 at the Faculty of Electrical Engineering at the TH Ilmenau. Then he was working as a development engineer, first at Relay Technique Grossbreitenbach and second at Robotron Sömmerda. In 1992, he became director of the Microsystems Technology Laboratories at the Technical University of Ilmenau. He has made sustained contributions to engineering research in the field of microfluidics. In this field, he developed silicon based ink jet print heads and several microreaction components. He developed one of the first microreaction design kits. For the French cosmetic company Ch. Dior, he successfully designed and developed microstructured components for a sophisticated distribution of certain beauty products on human skin. Since 2001, he is professor at the Technical University of Munich, Faculty of Electrical Engineering and Information Technology, Department of Microstructured Mechatronic Systems. He focused his research activities to piezoelectric materials and their possible use in microstructured elements. Besides microactuators as driving elements for microvalves, he deepened his activities on the development of piezoelectric micro energy harvesting devices. In his focus are periodic and discontinuous impulses that trigger oscillations of active elements by means of a suitable constructive design. Sensors for the detection of mechanical parameters are another focus of his research. Instead of known and easily replaceable sensors, his research is oriented on individualized sensors delivering individual signals for similar excitements. This characteristic supports the Physical Unclonable Functionality (PUF) of modern electronic devices. As member, he acts actively in several national and international Technical Committees. He is author of numerous papers and the textbook "Mikrosystemtechnik". He has acted as key note/plenary speaker for several international conferences.


Keynote Speaker IV



Prof. Sergei Alexandrov

Beihang University, China


Sergei Alexandrov is a Visiting Professor at Beihang University (Beijing, China) under the program “Recruitment Program for Global Experts” (“1000 Talent Plan”) and a Research Professor at the Laboratory for Technological Processes of the Institute for Problems in Mechanics of the Russian Academy of Sciences. He received his Ph.D. in Physics and Mathematics in 1990 and D.Sc. in Physics and Mathematics in 1994. He worked as a Professor at Moscow Aviation Technology Technical University (Russia), a Visiting Scientist at ALCOA Technical Center (USA), GKSS Research Centre (Germany) and Seoul National University (South Korea), and was a Visiting Professor at Aveiro University (Portugal), University of Besancon (France) and Technical University of Malaysia (Malaysia). He is a member of the Russian National Committee on Theoretical and Applied Mechanics. Sergei Alexandrov has published more than 400 papers in journals, books and conference proceedings, including three monographs and around 230 papers in journals indexed in the Web of Science. He has participated in the scientific committee of several international conferences and served as a reviewer in a wide range of international journals. He is on the editorial board of several journals including Continuum Mechanics and Thermodynamics (Springer) and Structural Engineering and Mechanics (Technopress). His research areas are plasticity theory, fracture mechanics, and their applications to metal forming and structural mechanics.


Invited Speaker



Prof. Ildoo Chung

Pusan National University, Korea


Ildoo Chung joined the faculty of Department of Polymer Science and Engineering at Pusan National University, Korea in 2005. Prior to that, he completed his postdoctoral training with Professor Jimmy Mays in Department of Chemistry at University of Tennessee, and with Professor Dong Xie in Department of Biomedical Engineering at University of Alabama at Birmingham, USA. He received his Ph. D. at Pusan National University in 2000. He is now serving editor-in-chief of Journal of Adhesion and Interface, and member of board of directors in the Polymer Society of Korea, the Korea Society of Adhesion and Interface, Korea Polyurethane Society, and Asian Cyclodextrin Conference. He had over 90 peer-reviewed publications and over 150 presentations in national and international conferences. His research interests are focused on advanced polymeric biomaterials such as drug delivery system, hard/soft tissue compatible polymers, photocurable 3D printing polymer, biodegradable polymer and composite system.




© Copyright 2018 2nd International Conference on Sensors, Materials and Manufacturing All rights reserved.